Residential Motors
Borewell Submersible Pumpsets
- These Pumpsets are designed to be used to pump water from borewells and are available in multiple sizes from 3 inch (V3) to 10 inch (V4).
- Borewell Submersible Pumpsets are available in Radial Flow type and Mixed Flow type. Radial Flow type is suitable for requirements with high lift but low discharge while Mixed Flow type is suitable for low lift high discharge.
- Borewell Submersible Pumpsets consists of Electric motor and Pump coupled together. The Pump consists of stack of Stages with each stage comprising a set of impeller and diffuser. When it operates the stages lift the water to the top.
- These Pumpsets are suitable for use in homes, Agriculture and Industry.
3 inch / 75mm Borewell Submersible Pumpsets
| Power : | 0.5 to 1.5 HP |
| Voltage : | 220V- 240V |
| Head : | Max. 165M |
| Disc : | Max. 4500LPH |
| Speed : | 2900 RPM |
4 inch / 100 mm Borewell Submersible Pumpsets
| Power : | 0.5 to 7.5 HP |
| Voltage : | 220V- 240V |
| Head : | Max. 616M |
| Disc : | Max. 22000LPH |
| Speed : | 2900RPM |
5 inch / 125mm Borewell Submersible Pumpsets
| Power : | 2.0 to 10.0 HP |
| Voltage : | 340V- 440V |
| Head : | Max. 65M |
| Disc : | Max. 48000LPH |
| Speed : | 2900 RPM |
6 inch / 150mm Borewell Submersible Pumpsets
| Power : | 2.0 to 30.0 HP |
| Voltage : | 180V – 240V |
| Head : | Max. 468M |
| Disc : | Max. 1440LPM |
| Speed : | 2900 RPM |
7 inch / 175mm Borewell Submersible Pumpsets
| Power : | 2.0 to 30.0 HP |
| Voltage : | 340V- 440V |
| Head : | Max. 106M |
| Disc : | Max. 2400LPM |
| Speed : | 2900 RPM |
8 inch / 200mm Borewell Submersible Pumpsets
| Power : | 5.0 to 60.0 HP |
| Voltage : | 340V- 440V |
| Head : | Max. 400M |
| Disc : | Max. 2700LPM |
| Speed : | 2900 RPM |
9 inch / 225mm Borewell Submersible Pumpsets
| Power : | 5.0 to 60.0 HP |
| Voltage : | 340V- 440V |
| Head : | Max. 106M |
| Disc : | Max. 3200LPM |
| Speed : | 2900 RPM |
10 inch / 250mm Borewell Submersible Pumpsets
| Power : | 5.0 to 60.0 HP |
| Voltage : | 340V- 440V |
| Head : | Max. 95M |
| Disc : | Max. 5000LPM |
| Speed : | 2900 RPM |
Openwell Submersible Pumpset
- It is a Pump which is designed to operate in submerged condition and is used in water bodies like openwells, rivers, ponds & lakes
- The Pumpsets creates a vacuum which sucks the water and lifts it to the ground.
- As it is submerged in water, it does not have any suction limit and can supply water continuously till water level completely drops down to pumpset level.
- Openwell Pumpsets are made with Single Stage impeller and Multi-Stage impellers. We also have vertical openwell models suitable for vertical installations.
- We TSO series pumpsets which can be installed both vertically and horizontally
- Openwell Pumpsets, available in Single phase are generally used for Domestic applications while Three Phase Pumpsets are used in Agriculture and industrial applications.
ASM SERIES
| Power : | 3.0 to 30.0 HP |
| Voltage : | 340 -440 v |
| Head : | Max. 128m |
| Disc : | Max. 1140 lpm |
| Speed : | 29000 RPM |
ASM SP SERIES
| Power : | 1.0 to 7.5 HP |
| Voltage : | 200V- 240V |
| Head : | Max.42M |
| Disc : | Max. 700 LPM |
| Speed : | 2900 RPM |
EAHM SERIES
| Power : | 3.0 to 7.5HP |
| Voltage : | 380 -415 v |
| Head : | Max. 116m |
| Disc : | Max. 600 lpm |
| Speed : | 2900 RPM |
Centrifugal Monoblock Pumpset
ACS SERIES
| Power : | 1.5 to 5 HP |
| Voltage : | 200V – 240V |
| Head : | Max. 42M |
| Disc : | Max. 42m |
| Speed : | 2900 rpm |
AMH SERIES
| Power : | 1.5 to 30.0 HP |
| Voltage : | 340V- 440V |
| Head : | Max. 95M |
| Disc : | Max. 2600 LPM |
| Speed : | 2900 RPM |
HCS SERIES
| Power : | 0.5HP to 1.0 HP |
| Voltage : | 200V – 240V |
| Head : | Max. 33M |
| Disc : | Max. 690lpm |
| Speed : | 2900 rpm |
AMS SERIES
| Power : | 2.0 to 15.0 HP |
| Voltage : | 340V- 440V |
| Head : | Max.24M |
| Disc : | Max. 4600LPM |
| Speed : | 2900RPM |
Horizontal Multistage Pumps
- These are a type of Pumpsets in which multiple diffuser and impeller sets are mounted on top of the other connected via common shaft.
- Each set of diffuser and impeller is called a stage. Pumpset having more than two stages are called multistage pumpsets.
- Multistage Pumps which are built horizontally are called Horizontal Multistage Pumpsets.
- Multistage Pumpsets works on the idea that multiple stages connected serially, will impart high pressure force to lift the water to greater height.
AHS SERIES
| Power : | 0.5HP to 2HP |
| Voltage : | 220V,50hz. |
| Head : | Max. 72m |
| Disc : | Max. 7.5m3/hr |
| Speed: | 2800RPM |
Submersible Sewage Pumps
- As the name suggests, these types of pumps are used to lift sewage from the underground collection tanks.
- It is generally used in apartments, high rise buildings and Sewage treatment plants to remove wastes.
- These pumps come with a large channel casing with single vane impeller allowing large solids.
- Some models also come with cutters that cut larger semi-solid materials to smaller and manageable sizes.
- When in operation , the pumpsets creates a vacuum which sucks the nearby solids and liquids and ejects them out through the discharge pipe.
ASWP
| Power : | 1.5 to 10.0 HP |
| Voltage : | 380V, 50Hz |
| Head : | Max. 43m |
| Disc : | Max. 108m3/hr |
| Solid handling size: | 25mm to 50mm |
ESWP / ESWP V
| Power : | Single phase 0.5 to 1.5 HP Three phase 0.5 to 3.0 HP |
| Voltage : | Single phase : 220V, 50Hz Three phase : 380V, 50Hz |
| Head : | Max. 20m |
| Disc : | Max. 108m3/hr |
| Speed : | 2850 rpm |
TSWP
| Power : | 1.5 to 15HP |
| Voltage : | 380V, 50Hz |
| Head : | Max. 49m |
| Disc : | Max. 78m3/hr |
Submersible Dewatering Pumps
- These pumpsets are used for the purpose of removing water from a flooded area.
- It is generally used in homes and businesses during storms, floods and in mines to remove underground water.
- Some models also come with cutters that cut larger semi-solid materials to smaller and manageable sizes.
- When in operation, the pumpsets creates a vacuum which sucks the nearby solids and liquids and ejects them out through the discharge pipe
ADP
| Power : | Single Phase: 0.5HP to 3.0HP Three Phase: 1.0HP to 3.0HP |
| Voltage : | Single Phase : 220V, 50Hz Three Phase: 380V, 50Hz |
| Head : | Max. 28m |
| Disc : | Max. 42m3/hr |
| Solid handling size: | 8mm to 10mm |
CDS
| Power : | 0.5HP & 1.0HP |
| Voltage : | Single Phase : 220V, 50Hz Three Phase: 380V, 50Hz |
| Head : | Max. 16m |
| Disc : | Max. 18m3/hr |
| Solid handling size: | Max. 7mm |
CDT
| Power : | 2HP to 7.5HP |
| Voltage : | 380V, 50Hz |
| Head : | Max. 40m |
| Disc : | Max. 96m3/hr |
| Solid handling size: | Max. 8.5mm |
CRDS
| Power : | 0.5HP |
| Voltage : | 220V |
| Head : | Max. 12m |
| Disc : | Max. 6.6m3/hr |
| Solid handling size: | Max. 3mm |
Self Priming Monoblock Pump
- These are monoblock pumpsets with self priming characteristics which are generally used in homes for lifting water from underground sump to Over head Tank.
- The main feature of the pumpset is that it does not require priming each time when it is started. Due to its design, a self priming pump creates a vacuum space which sucks both air and water from the bottom. The air is vented out continuously till the water level reaches the pumpset.
- Compared to standard centrifugal Pumps, these pumps can operate without manual assistance and do not require a foot valve.
- They are basically a centrifugal pump with a chamber or a mechanism that creates the necessary vacuum for priming.
AQUAMINI SERIES
| Power : | 0.5 HP |
| Voltage : | 200 – 240 V |
| Head : | Max. 36m |
| Disc : | 3100lph |
| Speed : | 2800 RPM |
CHR SERIES
| Power : | 0.5 HP to 1.0HP |
| Voltage : | 200 – 240 V |
| Head : | Max. 45m |
| Disc : | Max. 3230lph |
| Speed : | 2800 RPM |
DMH SERIES
| Power : | 0.5HP |
| Voltage : | 200V – 240V |
| Head : | Max. 30 M |
| Disc : | Max.47 LPM |
| Speed : | 2900 rpm |
DMS SERIES
| Power : | 0.5HP |
| Voltage : | 200V – 240V |
| Head : | Max. 36 M |
| Disc : | Max. 59 LPM |
| Speed : | 2900 rpm |
NEER SERIES
| Power : | 0.5 HP to 1.0HP |
| Voltage : | 200 – 240 V |
| Head : | Max. 39m |
| Disc : | Max. 3000lpm |
| Speed : | 2800 RPM |
SCM / HCS SP SERIES
| Power : | 1.0 to 1.5 HP |
| Voltage : | 200V – 240V |
| Head : | SCM: Max. 18m HCS-SP: Max: 21m |
| Disc : | SCM: Max. 410lpm HCS-SP: Max: 160lpm |
| Speed : | 2900 rpm |
SHR SERIES
| Power : | 0.5 HP to 1.0HP |
| Voltage : | 200 – 240 V |
| Head : | Max. 45m |
| Disc : | Max. 3230lph |
| Speed : | 2800 RPM |
Jet Pumpsets
- Jet Pumpset works on the idea of supplying pressurized jet of water to suck the surrounding water and lift it to the surface level from deep wells.
- The working of a jet pumps depends on two main components a nozzle and a venturi.
- The jet nozzle receives pressurized water from the pump, as the water passes through the jet nozzle, the speed of the water increases while the pressure decreases. (Similar to closing the opening of garden hose creates squirting action).
- The fast moving water jet along with the low pressure generated is what created suction around the nozzle. The surrounding water is sucked in and carried along with the fast moving water jet.
- However, in order for this jet to lift the water to the surface, it needs a venturi. The venturi reduces the water speed and pressurizes the water and lifts is to the pump on the surface.
- This combination of nozzle and venturi looks simple but has to be well-designed and matched according to get the best efficient operation. A matching nozzle and venturi set is called Jet Unit Assembly or Ejector Kits
TVJ / TVJ 2S
| Power : | 0.5 HP to 2.0 HP |
| Voltage : | 180V- 240V |
| Head : | Max. 77m |
| Disc : | Max. 2500 LPH |
| Speed : | 2900 RPM |
THJ
| Power : | 1.0 HP to 1.5 HP |
| Voltage : | 180V- 240V , 50hz. |
| Head : | Max. 50m |
| Disc : | Max. 2383 LPH |
| Speed : | 2900 RPM |
Shallow Well Jet Monoblock Pumpsets
- Jet Pumpset works on the idea of supplying pressurized jet of water to suck the surrounding water and lift it to the surface pump.
- The working of a jet pumps depends on two main components a nozzle and a venturi.
- The jet nozzle receives pressurized water from the pump, as the water passes through the jet nozzle, the speed of the water increases while the pressure decreases. (Similar to closing the opening of garden hose creates squirting action).
- The fast moving water jet along with the low pressure generated is what created suctin around the nozzle. The surrounding water is sucked in and carried along with the fast moving water jet.
- However, in order for this jet to lift the water to the surface, it needs a venturi. The venturi reduces the water speed and pressurizes the water and lifts is to the pump on the surface.
- This combination of nozzle and venturi looks simple but has to well-designed and matched according to get the best efficient operation. A matching nozzle and venturi set is called Jet Unit Assembly or Ejector Kits.
- The Difference between a Jet Pumpset and a shallow well jet monoblock pumps is the position of the Jet Unit Assembly / Ejector Kits. In a Shallow well jet , the Jet unit assembly is placed in front of the impeller while in Jet Pumpset the Jet Unit Asembly is placed below the water level.
TSJ
| Power : | 0.5HP to 1.0HP |
| Voltage : | 180V- 240V |
| Head : | Max. 40M |
| Disc : | Max. 60LPM |
| Speed : | 2880 RPM |
Compressor Pumpsets
- Compressor pumps are pumps which utilizes air to push water from the borewell to the surface.
- The Compressor Pump consists of the pump connected to a air hose which goes down to the bottom connecting to a air distributor. The air distributor is connected to a perforated delivery pipe which allows water to come in.
- It works on the idea that when compressed air pumped into the bore and distributed into the perforated delivery pipe, the very fine air bubbles mix with the water thus lowering their density and lifting the air water mixture through the delivery pipe to the surface.
ABC – Aquatex Borewell Compressor Pumps
| Head Range : | Upto 650feet |
| Working Pressure: | 9 Kg/ cm² |
| Voltage Range : | 200 / 240 V |
| HP range : | 1 to 2.0 HP |
| Motor Speed : | 1440 RPM |
AMC – Aquatex Mono Compressor Pumps
| Head Range : | Upto 400feet |
| Cylinders : | 1 |
| Voltage Range : | 200 / 240 V |
| HP range : | 1 to 1.5 HP |
| Speed : | 1440 |
Domestic Booster System
- Booster Pump systems are designed to improve the water pressure in your piping system.
- They are suitable to homes and offices where the water pressure is low or where the pressure of the water is dependent on gravity.
- Booster pump systems come with a pressure tank. The pressure tank consists of a diaphragm enclosed within air pressurized tank.
- When pumpset is turned on, the diaphragm expands within the same tank, since air is compressible, the volume occupied by air decreases while the pressure increases.
- The amount of pressure to be imparted is controlled using a pressure switch.
- The pressure switch has two scales on it – Range and Difference. Range refers to maximu pressure and is used to set the cut out pressure (pressure at which pumpset is turned off). Difference refers to level of p[ressure drop and is used to set the cut in pressure (pressure at which pumpset is turned on).
Eg. If range is 3 bar and difference is 1 bar. The cut off pressure is 3 bar and the cut in pressure is 2 bar. (i.e Range = cut out pressure and Range-Difference =cut in pressure) - When the water pressure in the pipe line comes down blow the cut-in pressure, the pumpset will switch on and when pressure increases to cut-out pressure, the pumpset will switch off.
ADBS
| Power : | 0.5HP to 2HP |
| Voltage : | 220V,50hz. |
| Head : | Max. 72m |
| Disc : | Max. 7.5m3/hr |
| Speed: | 2800RPM |
AMB
| Power : | 0.5 HP |
| Voltage : | 220V |
| Head : | Max. 32m |
| Disc : | Max. 2300lph |
| Speed : | 2800 RPM |