Building Service Motors

3 inch / 75mm Borewell Submersible Pumpsets
Power : | 0.5 to 1.5 HP |
Voltage : | 220V- 240V |
Head : | Max. 165M |
Disc : | Max. 4500LPH |
Speed : | 2900 RPM |

4 inch / 100 mm Borewell Submersible Pumpsets
Power : | 0.5 to 7.5 HP |
Voltage : | 220V- 240V |
Head : | Max. 616M |
Disc : | Max. 22000LPH |
Speed : | 2900RPM |

5 inch / 125mm Borewell Submersible Pumpsets
Power : | 2.0 to 10.0 HP |
Voltage : | 340V- 440V |
Head : | Max. 65M |
Disc : | Max. 48000LPH |
Speed : | 2900 RPM |

6 inch / 150mm Borewell Submersible Pumpsets
Power : | 2.0 to 30.0 HP |
Voltage : | 180V – 240V |
Head : | Max. 468M |
Disc : | Max. 1440LPM |
Speed : | 2900 RPM |

7 inch / 175mm Borewell Submersible Pumpsets
Power : | 2.0 to 30.0 HP |
Voltage : | 340V- 440V |
Head : | Max. 106M |
Disc : | Max. 2400LPM |
Speed : | 2900 RPM |

8 inch / 200mm Borewell Submersible Pumpsets
Power : | 5.0 to 60.0 HP |
Voltage : | 340V- 440V |
Head : | Max. 400M |
Disc : | Max. 2700LPM |
Speed : | 2900 RPM |

9 inch / 225mm Borewell Submersible Pumpsets
Power : | 5.0 to 60.0 HP |
Voltage : | 340V- 440V |
Head : | Max. 106M |
Disc : | Max. 3200LPM |
Speed : | 2900 RPM |

10 inch / 250mm Borewell Submersible Pumpsets
Power : | 5.0 to 60.0 HP |
Voltage : | 340V- 440V |
Head : | Max. 95M |
Disc : | Max. 5000LPM |
Speed : | 2900 RPM |
Hydro Pneumatic System
- Hydro Pneumatic Systems is designed to used in large scale pressure boosting operations in apartments, colonies, commercial high rise buildings, Office building, hotels and others.
- Hydro- Pneumatic systems consist of 2 to 6 High Pressure Multistage Pumpsets, Suction and Delivery manifolds with valves, Base Frame and suitable control panel.
- The Pressure Tanks are connected to the delivery manifold to reduce the no. of starts and stops of pumpsets.
- Based on requirement, the Hydro Pneumatic Systems are available with constant speed control panel and variable speed control panel.

APS MULTISTAGE
Power : | Single Phase: 0.5HP to 2HP,Three Phase: 0.5HP to 100HP |
Voltage : | Single Phase: 220 – 230V,Three Phase: 380 – 415V |
Head : | Max. 320m |
Disc : | Max. 150m3/hr |
Operating Pressure: | Upto 35bar |

APS SUBMERSIBLE
Power : | Single Phase: 0.5HP to 2HP,Three Phase: 0.5HP to 25HP |
Voltage : | Single Phase: 220 – 230V,Three Phase: 380 – 415V |
Head : | Max. 350m |
Disc : | Max.30m3/hr |
Operating Pressure: | Upto 35bar |
Domestic Booster System
- Booster Pump systems are designed to improve the water pressure in your piping system.
- They are suitable to homes and offices where the water pressure is low or where the pressure of the water is dependent on gravity.
- Booster pump systems come with a pressure tank. The pressure tank consists of a diaphragm enclosed within air pressurized tank.
- When pumpset is turned on, the diaphragm expands within the same tank, since air is compressible, the volume occupied by air decreases while the pressure increases.
- The amount of pressure to be imparted is controlled using a pressure switch.
- The pressure switch has two scales on it – Range and Difference. Range refers to maximu pressure and is used to set the cut out pressure (pressure at which pumpset is turned off). Difference refers to level of p[ressure drop and is used to set the cut in pressure (pressure at which pumpset is turned on).
Eg. If range is 3 bar and difference is 1 bar. The cut off pressure is 3 bar and the cut in pressure is 2 bar. (i.e Range = cut out pressure and Range-Difference =cut in pressure) - When the water pressure in the pipe line comes down blow the cut-in pressure, the pumpset will switch on and when pressure increases to cut-out pressure, the pumpset will switch off.

AMB
Power : | 0.5 HP |
Voltage : | 220V |
Head : | Max. 32m |
Disc : | Max. 2300lph |
Speed : | 2800 RPM |

ADBS
Power : | 0.5HP to 2HP |
Voltage : | 220V,50hz. |
Head : | Max. 72m |
Disc : | Max. 7.5m3/hr |
Speed: | 2800RPM |
Water Transfer System
- Water Transfer System is a full-fledged system designed to transfer and control the water supply with a fully automatic control system.
- The system was developed in order to prevent dry running of pumps and to prevent overflowing of water.
- Water Transfer System consists of multiple parallel pumpsets, suction and delivery manifolds with valves, base frame and suitable control panel.
- The control panel controls the number of pumpsets to operate based on system discharge and head.
- The system is pre-assembled, tested in factory and ready for installation at site

ATS
Power : | Single Phase: 0.5HP to 2HP,Three Phase :0.5HP to 100HP |
Voltage : | Single Phase: 220 – 230V,Three Phase: 380 – 415V |
Head : | Max. 350m |
Disc : | Max.150m3/hr |
Operating Pressure: | Upto 35bar |
Submersible Sewage Pumps
- As the name suggests, these types of pumps are used to lift sewage from the underground collection tanks.
- It is generally used in apartments, high rise buildings and Sewage treatment plants to remove wastes.
- These pumps come with a large channel casing with single vane impeller allowing large solids.
- Some models also come with cutters that cut larger semi-solid materials to smaller and manageable sizes.
- When in operation , the pumpsets creates a vacuum which sucks the nearby solids and liquids and ejects them out through the discharge pipe.

ASWP
Power : | 1.5 to 10.0 HP |
Voltage : | 380V, 50Hz |
Head : | Max. 43m |
Disc : | Max. 108m3/hr |
Solid handling size: | 25mm to 50mm |

ESWP / ESWP V
Power : | Single phase 0.5 to 1.5 HP Three phase 0.5 to 3.0 HP |
Voltage : | Single phase : 220V, 50Hz Three phase : 380V, 50Hz |
Head : | Max. 20m |
Disc : | Max. 108m3/hr |
Speed : | 2850 rpm |

TSWP
Power : | 1.5 to 15HP |
Voltage : | 380V, 50Hz |
Head : | Max. 49m |
Disc : | Max. 78m3/hr |
.
Submersible Dewatering Pumps
- These pumpsets are used for the purpose of removing water from a flooded area.
- It is generally used in homes and businesses during storms, floods and in mines to remove underground water.
- Some models also come with cutters that cut larger semi-solid materials to smaller and manageable sizes.
- When in operation, the pumpsets creates a vacuum which sucks the nearby solids and liquids and ejects them out through the discharge pipe.

ADP
Power : | Single Phase: 0.5HP to 3.0HP Three Phase: 1.0HP to 3.0HP |
Voltage : | Single Phase : 220V, 50Hz Three Phase: 380V, 50Hz |
Head : | Max. 28m |
Disc : | Max. 42m3/hr |
Solid handling size: | 8mm to 10mm |

CRDS
Power : | 0.5HP |
Voltage : | 220V |
Head : | Max. 12m |
Disc : | Max. 6.6m3/hr |
Solid handling size: | Max. 3mm |

CDT
Power : | 2HP to 7.5HP |
Voltage : | 380V, 50Hz |
Head : | Max. 40m |
Disc : | Max. 96m3/hr |
Solid handling size: | Max. 8.5mm |

CDS
Power : | 0.5HP & 1.0HP |
Voltage : | Single Phase : 220V, 50Hz Three Phase: 380V, 50Hz |
Head : | Max. 16m |
Disc : | Max. 18m3/hr |
Solid handling size: | Max. 7mm |
Vertical Multistage Pumps
- These are a type of Pumpsets in which multiple diffuser and impeller sets are mounted on top of the other connected via common shaft.
- Each set of diffuser and impeller is called a stage. Pumpset having more than two stages are called multistage pumpsets.
- Multistage Pumps which are built vertically are called Vertical Multistage pumpsets.
- Multistage Pumpsets works on the idea that multiple stages connected serially, will impart high pressure force to lift the water to greater height.

AVRE & AVRS SERIES
Power : | 3.0 to 20.0 HP |
Voltage : | 340V- 440V |
Head : | Max. 147M |
Disc : | Max. 1000 LPM |
Speed : | 2800RPM |

AV / AVI / AVN /AVS SERIES
Power : | Single Phase: 0.5HP to 3HP Three Phase0.5HP to 100HP |
Voltage : | Single Phase: 200-240V,50hz. |
Head : | Max. 300m |
Disc : | Max. 120m3/hr |
Speed: | 2800RPM |
Horizontal Multistage Pumps
- These are a type of Pumpsets in which multiple diffuser and impeller sets are mounted on top of the other connected via common shaft.
- Each set of diffuser and impeller is called a stage. Pumpset having more than two stages are called multistage pumpsets.
- Multistage Pumps which are built horizontally are called Horizontal Multistage Pumpsets.
- Multistage Pumpsets works on the idea that multiple stages connected serially, will impart high pressure force to lift the water to greater height

AHS SERIES
Power : | 0.5HP to 2HP |
Voltage : | 220V,50hz. |
Head : | Max. 72m |
Disc : | Max. 7.5m3/hr |
Speed: | 2800RPM |
Centrifugal Monoblock Pumpset
- As the name suggests, a Centrifugal Monoblock Pump is water Pump which converts Mechanical Centrifugal force or rotational force in a spinning impeller to Hydraulic force or Pressure force of the water, in order to lift water to a greater height.
- The Pumpset creates a vacuum which can suck water from a maximum suction limit of 20 ft and depending on water level at which the pumpset is installed accordingly.
- It consists of a Pump part and Electric Motor part. Electric Motor is the driver part while the Pump is the driven part.
- The Electric Motor and the Pump is connected together via a common shaft which transfers the power from the Electric motor to the Pump respectively.
- Since the set of Motor and Pump coupled together resemble as if they are single part or block, it is called a Monoblock Pumpset.
- Centrifugal Monoblock Pumpsets are available in both single phase and three phase power supply.

ACS SERIES
Power : | 1.5 to 5 HP |
Voltage : | 200V – 240V |
Head : | Max. 42M |
Disc : | Max. 42m |
Speed : | 2900 rpm |

HCS SERIES
Power : | 0.5HP to 1.0 HP |
Voltage : | 200V – 240V |
Head : | Max. 33M |
Disc : | Max. 690lpm |
Speed : | 2900 rpm |

AMS SERIES
Power : | 2.0 to 15.0 HP |
Voltage : | 340V- 440V |
Head : | Max.24M |
Disc : | Max. 4600LPM |
Speed : | 2900RPM |

AMH SERIES
Power : | 1.5 to 30.0 HP |
Voltage : | 340V- 440V |
Head : | Max. 95M |
Disc : | Max. 2600 LPM |
Speed : | 2900 RPM |
Openwell Submersible Pumpset
- It is a Pump which is designed to operate in submerged condition and is used in water bodies like openwells, rivers, ponds & lakes
- The Pumpsets creates a vacuum which sucks the water and lifts it to the ground.
- As it is submerged in water, it does not have any suction limit and can supply water continuously till water level completely drops down to pumpset level.
- Openwell Pumpsets are made with Single Stage impeller and Multi-Stage impellers. We also have vertical openwell models suitable for vertical installations.
- We TSO series pumpsets which can be installed both vertically and horizontally
- Openwell Pumpsets, available in Single phase are generally used for Domestic applications while Three Phase Pumpsets are used in Agriculture and industrial applications.

ASM SERIES
Power : | 3.0 to 30.0 HP |
Voltage : | 340 -440 v |
Head : | Max. 128m |
Disc : | Max. 1140 lpm |
Speed : | 29000 RPM |

ASM SP SERIES
Power : | 1.0 to 7.5 HP |
Voltage : | 200V- 240V |
Head : | Max.42M |
Disc : | Max. 700 LPM |
Speed : | 2900 RPM |

EAVM SERIES
Power : | 3.0 to 20.0 HP |
Voltage : | 380 -415 V |
Head : | Max. 128m |
Disc : | Max. 1140 lpm |
Speed : | 29000 RPM |

EAHM SERIES
Power : | 3.0 to 7.5HP |
Voltage : | 380 -415 v |
Head : | Max. 116m |
Disc : | Max. 600 lpm |
Speed : | 2900 RPM |