Residential Motors

Borewell Submersible Pumpsets

  • These Pumpsets are designed to be used to pump water from borewells and are available in multiple sizes from 3 inch (V3) to 10 inch (V4).
  • Borewell Submersible Pumpsets are available in Radial Flow type and Mixed Flow type. Radial Flow type is suitable for requirements with high lift but low discharge while Mixed Flow type is suitable for low lift high discharge.
  • Borewell Submersible Pumpsets consists of Electric motor and Pump coupled together. The Pump consists of stack of Stages with each stage comprising a set of impeller and diffuser. When it operates the stages lift the water to the top.
  • These Pumpsets are suitable for use in homes, Agriculture and Industry.
3 inch / 75mm Borewell Submersible Pumpsets
Power :0.5 to 1.5 HP
Voltage :220V- 240V
Head :Max. 165M
Disc :Max. 4500LPH
Speed :2900 RPM
4 inch / 100 mm Borewell Submersible Pumpsets
Power :0.5 to 7.5 HP
Voltage :220V- 240V
Head :Max. 616M
Disc :Max. 22000LPH
Speed :2900RPM
5 inch / 125mm Borewell Submersible Pumpsets
Power :2.0 to 10.0 HP
Voltage :340V- 440V
Head :Max. 65M
Disc :Max. 48000LPH
Speed :2900 RPM
6 inch / 150mm Borewell Submersible Pumpsets
Power :2.0 to 30.0 HP
Voltage :180V – 240V
Head :Max. 468M
Disc :Max. 1440LPM
Speed :2900 RPM
7 inch / 175mm Borewell Submersible Pumpsets
Power :2.0 to 30.0 HP
Voltage :340V- 440V
Head :Max. 106M
Disc :Max. 2400LPM
Speed :2900 RPM
8 inch / 200mm Borewell Submersible Pumpsets
Power :5.0 to 60.0 HP
Voltage :340V- 440V
Head :Max. 400M
Disc :Max. 2700LPM
Speed :2900 RPM
9 inch / 225mm Borewell Submersible Pumpsets
Power :5.0 to 60.0 HP
Voltage :340V- 440V
Head :Max. 106M
Disc :Max. 3200LPM
Speed :2900 RPM
10 inch / 250mm Borewell Submersible Pumpsets
Power :5.0 to 60.0 HP
Voltage :340V- 440V
Head :Max. 95M
Disc :Max. 5000LPM
Speed :2900 RPM

Openwell Submersible Pumpset

  • It is a Pump which is designed to operate in submerged condition and is used in water bodies like openwells, rivers, ponds & lakes
  • The Pumpsets creates a vacuum which sucks the water and lifts it to the ground.
  • As it is submerged in water, it does not have any suction limit and can supply water continuously till water level completely drops down to pumpset level.
  • Openwell Pumpsets are made with Single Stage impeller and Multi-Stage impellers. We also have vertical openwell models suitable for vertical installations.
  • We TSO series pumpsets which can be installed both vertically and horizontally
  • Openwell Pumpsets, available in Single phase are generally used for Domestic applications while Three Phase Pumpsets are used in Agriculture and industrial applications.
ASM SERIES
Power :3.0 to 30.0 HP
Voltage :340 -440 v
Head :Max. 128m
Disc :Max. 1140 lpm
Speed :29000 RPM
ASM SP SERIES
Power :1.0 to 7.5 HP
Voltage :200V- 240V
Head :Max.42M
Disc :Max. 700 LPM
Speed :2900 RPM
EAHM SERIES
Power :3.0 to 7.5HP
Voltage :380 -415 v
Head :Max. 116m
Disc :Max. 600 lpm
Speed :2900 RPM

Centrifugal Monoblock Pumpset

ACS SERIES
Power :1.5 to 5 HP
Voltage :200V – 240V
Head :Max. 42M
Disc :Max. 42m
Speed :2900 rpm
 AMH SERIES
Power :1.5 to 30.0 HP
Voltage :340V- 440V
Head :Max. 95M
Disc :Max. 2600 LPM
Speed :2900 RPM
HCS SERIES
Power :0.5HP to 1.0 HP
Voltage :200V – 240V
Head :Max. 33M
Disc :Max. 690lpm
Speed :2900 rpm
 AMS SERIES
Power :2.0 to 15.0 HP
Voltage :340V- 440V
Head :Max.24M
Disc :Max. 4600LPM
Speed :2900RPM

Horizontal Multistage Pumps

  • These are a type of Pumpsets in which multiple diffuser and impeller sets are mounted on top of the other connected via common shaft.
  • Each set of diffuser and impeller is called a stage. Pumpset having more than two stages are called multistage pumpsets.
  • Multistage Pumps which are built horizontally are called Horizontal Multistage Pumpsets.
  • Multistage Pumpsets works on the idea that multiple stages connected serially, will impart high pressure force to lift the water to greater height.
AHS SERIES
Power :0.5HP to 2HP
Voltage :220V,50hz.
Head :Max. 72m
Disc :Max. 7.5m3/hr
Speed:2800RPM

Submersible Sewage Pumps

  • As the name suggests, these types of pumps are used to lift sewage from the underground collection tanks.
  • It is generally used in apartments, high rise buildings and Sewage treatment plants to remove wastes.
  • These pumps come with a large channel casing with single vane impeller allowing large solids.
  • Some models also come with cutters that cut larger semi-solid materials to smaller and manageable sizes.
  • When in operation , the pumpsets creates a vacuum which sucks the nearby solids and liquids and ejects them out through the discharge pipe.
 
ASWP
Power :1.5 to 10.0 HP
Voltage :380V, 50Hz
Head :Max. 43m
Disc :Max. 108m3/hr
Solid handling size:25mm to 50mm
ESWP / ESWP V
Power :Single phase 0.5 to 1.5 HP Three phase 0.5 to 3.0 HP
Voltage :Single phase : 220V, 50Hz Three phase : 380V, 50Hz
Head :Max. 20m
Disc :Max. 108m3/hr
Speed :2850 rpm
TSWP
Power :1.5 to 15HP
Voltage :380V, 50Hz
Head :Max. 49m
Disc :Max. 78m3/hr

Submersible Dewatering Pumps

  • These pumpsets are used for the purpose of removing water from a flooded area.
  • It is generally used in homes and businesses during storms, floods and in mines to remove underground water.
  • Some models also come with cutters that cut larger semi-solid materials to smaller and manageable sizes.
  • When in operation, the pumpsets creates a vacuum which sucks the nearby solids and liquids and ejects them out through the discharge pipe
ADP
Power :Single Phase: 0.5HP to 3.0HP Three Phase: 1.0HP to 3.0HP
Voltage :Single Phase : 220V, 50Hz Three Phase: 380V, 50Hz
Head :Max. 28m
Disc :Max. 42m3/hr
Solid handling size:8mm to 10mm
CDS
Power :0.5HP & 1.0HP
Voltage :Single Phase : 220V, 50Hz Three Phase: 380V, 50Hz
Head :Max. 16m
Disc :Max. 18m3/hr
Solid handling size:Max. 7mm
CDT
Power :2HP to 7.5HP
Voltage :380V, 50Hz
Head :Max. 40m
Disc :Max. 96m3/hr
Solid handling size:Max. 8.5mm
CRDS
Power :0.5HP
Voltage :220V
Head :Max. 12m
Disc :Max. 6.6m3/hr
Solid handling size:Max. 3mm

Self Priming Monoblock Pump

  • These are monoblock pumpsets with self priming characteristics which are generally used in homes for lifting water from underground sump to Over head Tank.
  • The main feature of the pumpset is that it does not require priming each time when it is started. Due to its design, a self priming pump creates a vacuum space which sucks both air and water from the bottom. The air is vented out continuously till the water level reaches the pumpset.
  • Compared to standard centrifugal Pumps, these pumps can operate without manual assistance and do not require a foot valve.
  • They are basically a centrifugal pump with a chamber or a mechanism that creates the necessary vacuum for priming.
AQUAMINI SERIES
Power :0.5 HP
Voltage :200 – 240 V
Head :Max. 36m
Disc :3100lph
Speed :2800 RPM
CHR SERIES
Power :0.5 HP to 1.0HP
Voltage :200 – 240 V
Head :Max. 45m
Disc :Max. 3230lph
Speed :2800 RPM
DMH SERIES
Power :0.5HP
Voltage :200V – 240V
Head :Max. 30 M
Disc :Max.47 LPM
Speed :2900 rpm
DMS SERIES
Power :0.5HP
Voltage :200V – 240V
Head :Max. 36 M
Disc :Max. 59 LPM
Speed :2900 rpm
NEER SERIES
Power :0.5 HP to 1.0HP
Voltage :200 – 240 V
Head :Max. 39m
Disc :Max. 3000lpm
Speed :2800 RPM
SCM / HCS SP SERIES
Power :1.0 to 1.5 HP
Voltage :200V – 240V
Head :SCM: Max. 18m HCS-SP: Max: 21m
Disc :SCM: Max. 410lpm HCS-SP: Max: 160lpm
Speed :2900 rpm
 SHR SERIES
Power :0.5 HP to 1.0HP
Voltage :200 – 240 V
Head :Max. 45m
Disc :Max. 3230lph
Speed :2800 RPM

Jet Pumpsets

  • Jet Pumpset works on the idea of supplying pressurized jet of water to suck the surrounding water and lift it to the surface level from deep wells.
  • The working of a jet pumps depends on two main components a nozzle and a venturi.
  • The jet nozzle receives pressurized water from the pump, as the water passes through the jet nozzle, the speed of the water increases while the pressure decreases. (Similar to closing the opening of garden hose creates squirting action).
  • The fast moving water jet along with the low pressure generated is what created suction around the nozzle. The surrounding water is sucked in and carried along with the fast moving water jet.
  • However, in order for this jet to lift the water to the surface, it needs a venturi. The venturi reduces the water speed and pressurizes the water and lifts is to the pump on the surface.
  • This combination of nozzle and venturi looks simple but has to be well-designed and matched according to get the best efficient operation. A matching nozzle and venturi set is called Jet Unit Assembly or Ejector Kits
TVJ / TVJ 2S
Power :0.5 HP to 2.0 HP
Voltage :180V- 240V
Head :Max. 77m
Disc :Max. 2500 LPH
Speed :2900 RPM
THJ
Power :1.0 HP to 1.5 HP
Voltage :180V- 240V , 50hz.
Head :Max. 50m
Disc :Max. 2383 LPH
Speed :2900 RPM

Shallow Well Jet Monoblock Pumpsets

  • Jet Pumpset works on the idea of supplying pressurized jet of water to suck the surrounding water and lift it to the surface pump.
  • The working of a jet pumps depends on two main components a nozzle and a venturi.
  • The jet nozzle receives pressurized water from the pump, as the water passes through the jet nozzle, the speed of the water increases while the pressure decreases. (Similar to closing the opening of garden hose creates squirting action).
  • The fast moving water jet along with the low pressure generated is what created suctin around the nozzle. The surrounding water is sucked in and carried along with the fast moving water jet.
  • However, in order for this jet to lift the water to the surface, it needs a venturi. The venturi reduces the water speed and pressurizes the water and lifts is to the pump on the surface.
  • This combination of nozzle and venturi looks simple but has to well-designed and matched according to get the best efficient operation. A matching nozzle and venturi set is called Jet Unit Assembly or Ejector Kits.
  • The Difference between a Jet Pumpset and a shallow well jet monoblock pumps is the position of the Jet Unit Assembly / Ejector Kits. In a Shallow well jet , the Jet unit assembly is placed in front of the impeller while in Jet Pumpset the Jet Unit Asembly is placed below the water level.
TSJ
Power :0.5HP to 1.0HP
Voltage :180V- 240V
Head :Max. 40M
Disc :Max. 60LPM
Speed :2880 RPM

Compressor Pumpsets

  • Compressor pumps are pumps which utilizes air to push water from the borewell to the surface.
  • The Compressor Pump consists of the pump connected to a air hose which goes down to the bottom connecting to a air distributor. The air distributor is connected to a perforated delivery pipe which allows water to come in.
  • It works on the idea that when compressed air pumped into the bore and distributed into the perforated delivery pipe, the very fine air bubbles mix with the water thus lowering their density and lifting the air water mixture through the delivery pipe to the surface.
ABC – Aquatex Borewell Compressor Pumps
Head Range :Upto 650feet
Working Pressure:9 Kg/ cm²
Voltage Range :200 / 240 V
HP range :1 to 2.0 HP
Motor Speed :1440 RPM
AMC – Aquatex Mono Compressor Pumps
Head Range :Upto 400feet
Cylinders :1
Voltage Range :200 / 240 V
HP range :1 to 1.5 HP
Speed :1440

Domestic Booster System

  • Booster Pump systems are designed to improve the water pressure in your piping system.
  • They are suitable to homes and offices where the water pressure is low or where the pressure of the water is dependent on gravity.
  • Booster pump systems come with a pressure tank. The pressure tank consists of a diaphragm enclosed within air pressurized tank.
  • When pumpset is turned on, the diaphragm expands within the same tank, since air is compressible, the volume occupied by air decreases while the pressure increases.
  • The amount of pressure to be imparted is controlled using a pressure switch.
  • The pressure switch has two scales on it – Range and Difference. Range refers to maximu pressure and is used to set the cut out pressure (pressure at which pumpset is turned off). Difference refers to level of p[ressure drop and is used to set the cut in pressure (pressure at which pumpset is turned on).
    Eg. If range is 3 bar and difference is 1 bar. The cut off pressure is 3 bar and the cut in pressure is 2 bar. (i.e Range = cut out pressure and Range-Difference =cut in pressure)
  • When the water pressure in the pipe line comes down blow the cut-in pressure, the pumpset will switch on and when pressure increases to cut-out pressure, the pumpset will switch off.
ADBS
Power :0.5HP to 2HP
Voltage :220V,50hz.
Head :Max. 72m
Disc :Max. 7.5m3/hr
Speed:2800RPM
AMB
Power :0.5 HP
Voltage :220V
Head :Max. 32m
Disc :Max. 2300lph
Speed :2800 RPM